Mikrotik CCR Winbox First Look
There’s not a lot to see, but Mike and I take a look. Enjoy!
Hit refresh if you don’t see the video below!
Here’s a dump of it’s current config:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 | MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK MikroTik RouterOS 6.0rc1 (c) 1999-2012 http://www.mikrotik.com/ /interface ethernet set 0 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:1F mtu=1500 name=ether1 speed=100Mbps set 1 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:20 mtu=1500 name=ether2 speed=100Mbps set 2 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:21 mtu=1500 name=ether3 speed=100Mbps set 3 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:22 mtu=1500 name=ether4 speed=100Mbps set 4 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:23 mtu=1500 name=ether5 speed=100Mbps set 5 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:24 mtu=1500 name=ether6 speed=100Mbps set 6 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:25 mtu=1500 name=ether7 speed=100Mbps set 7 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:26 mtu=1500 name=ether8 speed=100Mbps set 8 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:27 mtu=1500 name=ether9 speed=100Mbps set 9 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:28 mtu=1500 name=ether10 speed=100Mbps set 10 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:29 mtu=1500 name=ether11 speed=100Mbps set 11 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:2A mtu=1500 name=ether12 speed=100Mbps set 12 arp=enabled auto-negotiation=no disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:1B mtu=1500 name=sfp1 sfp-rate-select=high \ speed=1Gbps set 13 arp=enabled auto-negotiation=no disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:1C mtu=1500 name=sfp2 sfp-rate-select=high \ speed=1Gbps set 14 arp=enabled auto-negotiation=no disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:1D mtu=1500 name=sfp3 sfp-rate-select=high \ speed=1Gbps set 15 arp=enabled auto-negotiation=no disabled=no full-duplex=yes l2mtu=1590 \ mac-address=00:0C:42:00:AE:1E mtu=1500 name=sfp4 sfp-rate-select=high \ speed=1Gbps /interface wireless security-profiles set [ find default=yes ] authentication-types="" eap-methods=passthrough \ group-ciphers=aes-ccm group-key-update=5m interim-update=0s \ management-protection=disabled management-protection-key="" mode=none name=\ default radius-eap-accounting=no radius-mac-accounting=no \ radius-mac-authentication=no radius-mac-caching=disabled radius-mac-format=\ XX:XX:XX:XX:XX:XX radius-mac-mode=as-username static-algo-0=none \ static-algo-1=none static-algo-2=none static-algo-3=none static-key-0="" \ static-key-1="" static-key-2="" static-key-3="" static-sta-private-algo=\ none static-sta-private-key="" static-transmit-key=key-0 \ supplicant-identity=MikroTik tls-certificate=none tls-mode=no-certificates \ unicast-ciphers=aes-ccm wpa-pre-shared-key="" wpa2-pre-shared-key="" /ip dhcp-client option set clientid code=61 name=clientid value="0x01\$(CLIENT_MAC)" set hostname code=12 name=hostname value="\$(HOSTNAME)" /ip hotspot profile set [ find default=yes ] dns-name="" hotspot-address=0.0.0.0 html-directory=\ hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=\ cookie,http-chap name=default rate-limit="" smtp-server=0.0.0.0 \ split-user-domain=no use-radius=no /ip hotspot user profile set [ find default=yes ] idle-timeout=none keepalive-timeout=2m name=default \ shared-users=1 status-autorefresh=1m transparent-proxy=no /ip ipsec proposal set [ find default=yes ] auth-algorithms=sha1 disabled=no enc-algorithms=3des \ lifetime=30m name=default pfs-group=modp1024 /ip pool add name=dhcp_pool1 ranges=10.1.12.10-10.1.12.254 /ip dhcp-server add address-pool=dhcp_pool1 authoritative=after-2sec-delay bootp-support=static \ disabled=no interface=ether12 lease-script="" lease-time=10m name=dhcp1 /port set 0 baud-rate=auto data-bits=8 flow-control=none name=serial0 parity=none \ stop-bits=1 /ppp profile set 0 change-tcp-mss=yes name=default only-one=default use-compression=default \ use-encryption=default use-mpls=default use-vj-compression=default set 1 change-tcp-mss=yes name=default-encryption only-one=default \ use-compression=default use-encryption=yes use-mpls=default \ use-vj-compression=default /queue type set 0 kind=pfifo name=default pfifo-limit=50 set 1 kind=pfifo name=ethernet-default pfifo-limit=50 set 2 kind=sfq name=wireless-default sfq-allot=1514 sfq-perturb=5 set 3 kind=red name=synchronous-default red-avg-packet=1000 red-burst=20 \ red-limit=60 red-max-threshold=50 red-min-threshold=10 set 4 kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=5 set 5 kind=pcq name=pcq-upload-default pcq-burst-rate=0 pcq-burst-threshold=0 \ pcq-burst-time=10s pcq-classifier=src-address pcq-dst-address-mask=32 \ pcq-dst-address6-mask=128 pcq-limit=50 pcq-rate=0 pcq-src-address-mask=32 \ pcq-src-address6-mask=128 pcq-total-limit=2000 set 6 kind=pcq name=pcq-download-default pcq-burst-rate=0 pcq-burst-threshold=0 \ pcq-burst-time=10s pcq-classifier=dst-address pcq-dst-address-mask=32 \ pcq-dst-address6-mask=128 pcq-limit=50 pcq-rate=0 pcq-src-address-mask=32 \ pcq-src-address6-mask=128 pcq-total-limit=2000 set 7 kind=none name=only-hardware-queue set 8 kind=mq-pfifo mq-pfifo-limit=50 name=multi-queue-ethernet-default set 9 kind=pfifo name=default-small pfifo-limit=10 /routing bgp instance set default as=65530 client-to-client-reflection=yes disabled=no \ ignore-as-path-len=no name=default out-filter="" redistribute-connected=no \ redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \ redistribute-static=no router-id=0.0.0.0 routing-table="" /routing ospf instance set [ find default=yes ] disabled=no distribute-default=never in-filter=ospf-in \ metric-bgp=auto metric-connected=20 metric-default=1 metric-other-ospf=auto \ metric-rip=20 metric-static=20 name=default out-filter=ospf-out \ redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=no \ redistribute-rip=no redistribute-static=no router-id=0.0.0.0 /routing ospf area set [ find default=yes ] area-id=0.0.0.0 disabled=no instance=default name=\ backbone type=default /snmp community set [ find default=yes ] addresses=0.0.0.0/0 authentication-password="" \ authentication-protocol=MD5 encryption-password="" encryption-protocol=DES \ name=public read-access=yes security=none write-access=no /system logging action set 0 memory-lines=100 memory-stop-on-full=no name=memory target=memory set 1 disk-file-count=2 disk-file-name=log disk-lines-per-file=100 \ disk-stop-on-full=no name=disk target=disk set 2 name=echo remember=yes target=echo set 3 bsd-syslog=no name=remote remote-port=514 src-address=0.0.0.0 \ syslog-facility=daemon syslog-severity=auto target=remote /user group set read name=read policy="local,telnet,ssh,reboot,read,test,winbox,password,web\ ,sniff,sensitive,api,!ftp,!write,!policy" skin=default set write name=write policy="local,telnet,ssh,reboot,read,write,test,winbox,pass\ word,web,sniff,sensitive,api,!ftp,!policy" skin=default set full name=full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,wi\ nbox,password,web,sniff,sensitive,api" skin=default /interface bridge settings set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=no /interface l2tp-server server set authentication=pap,chap,mschap1,mschap2 default-profile=default-encryption \ enabled=no max-mru=1460 max-mtu=1460 mrru=disabled /interface ovpn-server server set auth=sha1,md5 certificate=none cipher=blowfish128,aes128 default-profile=\ default enabled=no keepalive-timeout=60 mac-address=FE:E8:38:24:3C:BE \ max-mtu=1500 mode=ip netmask=24 port=1194 require-client-certificate=no /interface pptp-server server set authentication=mschap1,mschap2 default-profile=default-encryption enabled=\ no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled /interface sstp-server server set authentication=pap,chap,mschap1,mschap2 certificate=none default-profile=\ default enabled=no keepalive-timeout=60 max-mru=1500 max-mtu=1500 mrru=\ disabled port=443 verify-client-certificate=no /interface wireless align set active-mode=yes audio-max=-20 audio-min=-100 audio-monitor=\ 00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 frame-size=300 \ frames-per-second=25 receive-all=no ssid-all=no /interface wireless sniffer set channel-time=200ms file-limit=10 file-name="" memory-limit=10 \ multiple-channels=no only-headers=no receive-errors=no streaming-enabled=no \ streaming-max-rate=0 streaming-server=0.0.0.0 /interface wireless snooper set channel-time=200ms multiple-channels=yes receive-errors=no /ip accounting set account-local-traffic=no enabled=no threshold=256 /ip accounting web-access set accessible-via-web=no address=0.0.0.0/0 /ip address add address=10.1.12.1/24 disabled=no interface=ether12 network=10.1.12.0 /ip dhcp-server config set store-leases-disk=5m /ip dhcp-server network add address=10.1.12.0/24 dhcp-option="" dns-server=10.1.12.1 gateway=10.1.12.1 \ ntp-server="" wins-server="" /ip dns set allow-remote-requests=no cache-max-ttl=1w cache-size=2048KiB \ max-udp-packet-size=4096 query-server-timeout=2s query-total-timeout=10s \ servers="" /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \ tcp-close-wait-timeout=10s tcp-established-timeout=1d tcp-fin-wait-timeout=\ 10s tcp-last-ack-timeout=10s tcp-syn-received-timeout=5s \ tcp-syn-sent-timeout=5s tcp-syncookie=no tcp-time-wait-timeout=10s \ udp-stream-timeout=3m udp-timeout=10s /ip firewall service-port set ftp disabled=no ports=21 set tftp disabled=no ports=69 set irc disabled=no ports=6667 set h323 disabled=no set sip disabled=no ports=5060,5061 sip-direct-media=yes set pptp disabled=no /ip hotspot service-port set ftp disabled=no ports=21 /ip neighbor discovery set sfp1 disabled=no set sfp2 disabled=no set sfp3 disabled=no set sfp4 disabled=no set ether1 disabled=no set ether2 disabled=no set ether3 disabled=no set ether4 disabled=no set ether5 disabled=no set ether6 disabled=no set ether7 disabled=no set ether8 disabled=no set ether9 disabled=no set ether10 disabled=no set ether11 disabled=no set ether12 disabled=no /ip proxy set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 \ cache-on-disk=no enabled=no max-cache-size=none max-client-connections=600 \ max-fresh-time=3d max-server-connections=600 parent-proxy=0.0.0.0 \ parent-proxy-port=0 port=8080 serialize-connections=no src-address=0.0.0.0 /ip service set telnet address="" disabled=no port=23 set ftp address="" disabled=no port=21 set www address="" disabled=no port=80 set ssh address="" disabled=no port=22 set www-ssl address="" certificate=none disabled=yes port=443 set api address="" disabled=yes port=8728 set winbox address="" disabled=no port=8291 /ip smb set allow-guests=yes comment=MikrotikSMB domain=MSHOME enabled=no interfaces=\ all /ip smb shares set [ find default=yes ] comment="default share" directory=/pub disabled=no \ max-sessions=10 name=pub /ip smb users set [ find default=yes ] disabled=no name=guest password="" read-only=yes /ip socks set connection-idle-timeout=2m enabled=no max-connections=200 port=1080 /ip traffic-flow set active-flow-timeout=30m cache-entries=4k enabled=no inactive-flow-timeout=\ 15s interfaces=all /ip upnp set allow-disable-external-interface=yes enabled=no show-dummy-rule=yes #error exporting /ip usb client #error exporting /ip usb server /lcd set backlight-timeout=never enabled=yes /lcd slideshow-screen set 0 disabled=no timeout=10s set 1 disabled=no timeout=10s set 2 disabled=no timeout=10s set 3 disabled=no timeout=10s set 4 disabled=no timeout=10s set 5 disabled=no timeout=10s /mpls set dynamic-label-range=16-1048575 propagate-ttl=yes /mpls interface set [ find default=yes ] disabled=no interface=all mpls-mtu=1508 /mpls ldp set distribute-for-default-route=no enabled=no hop-limit=255 loop-detect=no \ lsr-id=0.0.0.0 path-vector-limit=255 transport-address=0.0.0.0 \ use-explicit-null=no /port firmware set directory=firmware ignore-directip-modem=no /ppp aaa set accounting=yes interim-update=0s use-radius=no /queue interface set sfp1 queue=only-hardware-queue set sfp2 queue=only-hardware-queue set sfp3 queue=only-hardware-queue set sfp4 queue=only-hardware-queue set ether1 queue=only-hardware-queue set ether2 queue=only-hardware-queue set ether3 queue=only-hardware-queue set ether4 queue=only-hardware-queue set ether5 queue=only-hardware-queue set ether6 queue=only-hardware-queue set ether7 queue=only-hardware-queue set ether8 queue=only-hardware-queue set ether9 queue=only-hardware-queue set ether10 queue=only-hardware-queue set ether11 queue=only-hardware-queue set ether12 queue=only-hardware-queue /radius incoming set accept=no port=3799 /routing bfd interface set [ find default=yes ] disabled=no interface=all interval=0.2s min-rx=0.2s \ multiplier=5 /routing mme set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m \ gateway-selection=no-gateway origination-interval=5s preferred-gateway=\ 0.0.0.0 timeout=1m ttl=50 /routing rip set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 \ metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \ redistribute-connected=no redistribute-ospf=no redistribute-static=no \ routing-table=main timeout-timer=3m update-timer=30s /snmp set contact="" enabled=no engine-id="" location="" trap-generators="" \ trap-target="" trap-version=1 /system clock set time-zone-name=manual /system clock manual set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start=\ "jan/01/1970 00:00:00" time-zone=+00:00 /system console set [ find port=serial0 ] channel=0 disabled=no port=serial0 term=vt102 /system health set fan-mode=auto use-fan=main /system identity set name=CouldCoreRouter /system logging set 0 action=memory disabled=no prefix="" topics=info set 1 action=memory disabled=no prefix="" topics=error set 2 action=memory disabled=no prefix="" topics=warning set 3 action=echo disabled=no prefix="" topics=critical /system note set note="" show-at-login=yes /system ntp client set enabled=no mode=broadcast primary-ntp=0.0.0.0 secondary-ntp=0.0.0.0 /system resource irq set 0 cpu=auto set 1 cpu=auto set 2 cpu=auto set 3 cpu=auto set 4 cpu=auto set 5 cpu=auto set 6 cpu=auto set 7 cpu=auto /system resource irq rps set sfp1 disabled=yes set sfp2 disabled=yes set sfp3 disabled=yes set sfp4 disabled=yes set ether1 disabled=yes set ether2 disabled=yes set ether3 disabled=yes set ether4 disabled=yes set ether5 disabled=yes set ether6 disabled=yes set ether7 disabled=yes set ether8 disabled=yes set ether9 disabled=yes set ether10 disabled=yes set ether11 disabled=yes set ether12 disabled=yes /system routerboard settings set baud-rate=115200 boot-delay=2s boot-device=nand-if-fail-then-ethernet \ boot-protocol=bootp enable-jumper-reset=yes enter-setup-on=any-key \ force-backup-booter=no memory-frequency=1066DDR silent-boot=no /system upgrade mirror set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=\ 0.0.0.0 user="" /system watchdog set auto-send-supout=no automatic-supout=yes no-ping-delay=5m watch-address=\ none watchdog-timer=yes /tool bandwidth-server set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=100 /tool e-mail set address=0.0.0.0 from=<> password="" port=25 start-tls=no user="" /tool graphing set page-refresh=300 store-every=5min /tool mac-server set [ find default=yes ] disabled=no interface=all /tool mac-server mac-winbox set [ find default=yes ] disabled=no interface=all /tool mac-server ping set enabled=yes /tool sms set allowed-number="" channel=0 keep-max-sms=0 receive-enabled=no secret="" /tool sniffer set file-limit=1000KiB file-name="" filter-ip-address="" filter-ip-protocol="" \ filter-mac-address="" filter-mac-protocol="" filter-port="" filter-stream=\ yes interface=all memory-limit=100KiB memory-scroll=yes only-headers=no \ streaming-enabled=no streaming-server=0.0.0.0 /tool traffic-generator set latency-distribution-scale=10 test-id=0 /user aaa set accounting=yes default-group=read exclude-groups="" interim-update=0s \ use-radius=no [admin@CouldCoreRouter] > |
The LCD options seem limited…on and off and the timing for the slideshow.
The LCD configuration is only in beta right now, we plan to add more options in next v6 releases
@Normis
Thanks for the update kiddo…Straight from the zirgs mouth 😉