/interface bridge
add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \
    disabled=no forward-delay=15s l2mtu=65535 max-message-age=20s mtu=1500 \
    name=bridge1 priority=0x8000 protocol-mode=none transmit-hold-count=6
/routing bgp instance
set default as=200 client-to-client-reflection=yes disabled=no \
    ignore-as-path-len=no name=default out-filter="" redistribute-connected=\
    no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \
    redistribute-static=no router-id=10.1.0.18 routing-table=""
/ip address
add address=192.168.223.212/24 disabled=no interface=ether3 network=\
    192.168.223.0
add address=10.1.0.18/30 disabled=no interface=ether1 network=10.1.0.16
add address=7.7.7.0/24 disabled=no interface=bridge1 network=7.7.7.0
/routing bgp network
add disabled=no network=7.7.7.0/24 synchronize=no
/routing bgp peer
add address-families=ip as-override=no default-originate=always disabled=no \
    hold-time=3m in-filter="" instance=default multihop=no name=to-mtk4 \
    nexthop-choice=default out-filter="" passive=no remote-address=10.1.0.17 \
    remote-as=300 remove-private-as=no route-reflect=no tcp-md5-key="" ttl=\
    default use-bfd=no
add address-families=ip as-override=no default-originate=never disabled=no \
    hold-time=3m in-filter=cisco-in instance=default multihop=no name=cisco \
    nexthop-choice=default out-filter="" passive=no remote-address=\
    192.168.223.16 remote-as=400 remove-private-as=no route-reflect=no \
    tcp-md5-key="" ttl=default use-bfd=no
/routing filter
add action=discard chain=cisco-in disabled=no invert-match=no prefix=\
    0.0.0.0/0 prefix-length=0-32 set-bgp-prepend-path=""
/system identity
set name=mtkisp2