Skip to content
Dec 3 / Greg

RouterOS V6.7 Released

What\\’s new in 6.7 (2013-Nov-29 13:37):

*) support Android usb tethering interface; What’s all this action about…I can plug my phone in and tether with a Mikrotik…yes please!
*) ipsec – added aes-gcm icv16 encryption mode;
*) ipsec – added aes-ctr encryption mode;
*) ipsec – added sha256 and sha512 support;
*) ipsec – proposal defaults changed to aes-128 and sha1 for both phase1 and phase2;
*) ipsec – fix policy bypass on IPv6 gre, ipip, eoip tunnels when policy uses protocol filter;
A whole slew of ipsec updates!
*) leds – inverted modem signal trigger, now it will trigger when the signal level rises above the treshold;
*) wireless – improve rate selection for nstreme protocol
*) poe – new poe controller firmware for RB750UP and OmniTIK UPA;
*) certificate – support ip, dns and email subject alternative names;
*) dhcpv4 server – added REMOTE_ID option variable for relayed packets;
*) userman – fix crash on tilera;
*) fixed hairpin nat on bridge with use-ip-firewall=yes;
*) fixed vlan on bridge after reboot having 00:00:00:00:00:00 mac address;
*) address-list – allow manually adding timeoutable entries; AWESOME. Jimmy and I were just rigging methods to accomplish this…now it is just built in!
*) address-list – show dynamic entry timeout;
*) fixed l2mtu changing on CCRs – could cause port flapping;
*) disabling/enabling ethernet ports did not work properly on CCRs – could cause port flapping;
*) fixed port flapping on CCR – could happen when having other than only-hardware-queue interface queue. More important CCR updates.
Note that having other interface queue than only-hardware-queue dramatically reduces performace, so should be avoided if possible;


leave a comment
  1. Mike Hammett / Dec 4 2013

    I wonder how that tethering works.

  2. Greg / Dec 5 2013

    Dunno, can’t find anything on it yet…

Leave a Comment