Lets see…that breaks down to 50 days at 480P. That would be 1 camera straight for 50 days, or 50 cameras for 1 day. This is actually pretty decent. If we were to configure the cameras for motion based recording it should even out pretty well.

I LOVE the idea of just taking a tiny appliance, plugging it in and away you go. I have a feeling I’ll be deploying one of these within a month or two. I’m looking forward to it actually. The interface looks pretty much the same as Unifi’s interface, which means you will be familiar with the product in seconds.

I’m looking forward to seeing just how fast I can deploy an entire system. I also plan to do a quick start/overview video of my initial experiences with the product.

Looks like MSRP is somewhere in the $330 range. What say you guys?

Regulatory updates:
- New: Lock country code for Ukraine
- Fix: Rocket M5 Titanium: DFS band unlock with authorisation key
- Fix: Remove DFS enable/disable option for EU/Switzerland, turn DFS ON after FW upgrade
- Fix: Update maximum EIRP from 20dBm to 23dBm for EU countries (indoor range)
- Fix: Update maximum EIRP from 20dBm to 23dBm for Vietnam (in frequency range 5150-5350 MHz)
- Fix: Regulatory update for Norway (5GHz band frequencies and EIRP limits update)

- WEB UI: Channel list with indication for Indoor channels (EU/Switzerland)
- WEB UI: Possibility to hide indoor channels (EU/Switzerland)

Fixes:
- Fix: Sometimes AP stops passing traffic in PtMP setup
- Fix: UAPSD power saving problems
- Fix: In some cases web server may lock up after some time due to memory leak (possible fix)
- Fix: Polycom SpectraLink 8030 wireless phone connection issues
- Fix: AirGrid M5 HP: Change Antenna gain from 28dBi to 27dBi according antenna specification

There are only two ways to disable the radio: one is to unplug the AP and the other is to SSH into the device and disable the wireless interface.
Disable wireless interface:

1

ifconfig wifi0 down

Enable wireless interface:

1

ifconfig wifi0 up

But if you have a lot of APs this isn’t really practical. So I wrote a program hehehe.

You update a test file that lists your APs, and they propagate into the listbox on starting.

When it first boots it asks for the username/password to SSH into the devices.

After that you can disable/enable all of the at the same time or do them individually by selecting one from the list and clicking the appropriate button.

When you first create the list if you haven’t already putty’d or plink’d into the device, you will need to hit the ssh key button. This will open plink and allow you to accept the SSH key for the device.

**EDIT** Updated 5/8/13 to add support for pro shutdown.
The compiled program and source can be found here Ubiquiti Radio Control.zip (427)

Have fun kids

First SSH/telnet into your wireless controller.

To list the APs:

1

show ap summary

Take the list of APs and format them as so to disable B G N radios:

1

802.11b disable ApName

The trick is to really just to make a list of all your APs in this fashion and paste them in.

To enable the radios do this:

1

802.11b enable ApName

To disable A N radios:

1

802.11a disable ApName

To enable them back:

1

802.11a enable ApName

This will allow you to enable/disable the radios in mass, which should make your task of testing just a little bit easier.

Syslog Alerts

1
2

use syslog;
update syslog_alert set email=replace(email,', me@gregsowell.com','');

Thold Alerts

1
2

use cacti;
update cacti set thold_data=replace(notify_extra,'me@gregsowell.com, ','');

In this one we have Greg(I have to apologize for my extreme tiredness in this one. I was on the tail end of a looooong sleepless week hehehe), JJ, Justin Wilson, and a new guest Justin Miller. I met Miller at the Vegas MUM and he’s been kicking around with us ever since. He is the brains for the largest WISP in Virginia and he is kind enough to share some of that grey matter with us.

We talk about:
Ubiquiti’s AirFiber
Mikrotik CCR installs
Sensor Ninja, JJ’s new project.
Interstate sealed batteries.
A little bit about Ubiquiti mFi experiences.
Wilson talks about Bitlomat. New AP/CPE equipment.

As always, let us know what you guys think!

Also, I LOVE this freeze frame preview of Miller’s face bwahahahaha…good times.

Click here to view the post!

* Bullet M2/M5/Titanium
* Rocket M2/M2 Titanium/M3/M365/M900/M5/M5 GPS/M5 Titanium/M6
* NanoStation M2/M3/M365/M5/M6
* NanoStation Loco M2/M900/M5
* NanoBridge M2/M3/M365/M900/M5
* AirGrid M2/M5/HP/HP New
* PowerBridge M3/M365/M5/M10
* PicoStation M2
* AirRouter/HP
* PowerAP N

====================================================================
Version 5.5.4-Service Release (March 13, 2013)
———————————————-

New:
- New: Data rate module: Alternative data rate algorithm option
- New: WEB UI: Audio option for Antenna Alignment Tool
- New: WEB UI: “Feed only – 3dBi” option for antenna type (AirGrid and NanoBridge models only)

Improvements:
- airMax: Improved performance in PtMP scenarios
- airMax: Lower latency in Long Range PTP mode
- airMax: Voice performance/latency improvements in PtMP scenarios

- QoS: Map commonly used VoIP TOS values (0×68, 0xb8) to Voice queue

- Speed test: Improved timeout/errors handling and reporting
- TFTP recovery: Reset configuration to factory defaults when executing TFTP recovery mode without need to hold Reset button for 15sec and upload firmware image
- airView: Update certificate

- WEB UI: Show if custom scripts are present on device
- WEB UI: Show signal strength from remote radio in Station information window (airMax mode only)
- WEB UI: Show Station TX/RX bit rate statistics
- WEB UI: Disable WEB UI while airView is running
- WEB UI: Automatically redirect to HTTPS port when running Speed test
- WEB UI: Make MAC addresses in Main page easily selectable
- WEB UI: Add help text for UBNT/Advanced settings pages
- WEB UI: Improved FW update failure messages
- WEB UI: Do not offer to apply configuration changes if there are no any changes made
- WEB UI: Latitude/Longitude setting validation
- WEB UI: Interface Language update: French translations
- WEB UI: Interface Language update: Lithuanian translation

- Stability: Check filesystem on boot
- Stability: Memory leak protection for less than 1MB of RAM
- Stability: HW watchdog in u-boot

Fixes:
- Fix: airMax: Radio is transmitting when operating in airView mode (AP mode only)
- Fix: airMax: Long range PtP mode: AP gets stuck at 81Mbps rate and transmit throughput goes down
- Fix: airMax: Sometimes AP locks up when applying configuration changes (possible fix)
- Fix: airSync: Rocket Titanium airSync Slave doesn’t connect to airSync Master
- Fix: airSelect: Default airSelect announce count set to 30
- Fix: airView: airView does not start when Device Name contains comma symbol
- Fix: airView: M900/M3/M365/M6 products does not scan full frequency range
- Fix: Detect Ethernet loopback on defective device and bring Ethernet interface down
- Fix: Sometimes M Series devices hang during reboot (except Titanium)
- Fix: Change Max MTU to 2024 bytes on both Ethernet interfaces
- Fix: Returning from Test mode does not revert some configuration changes
- Fix: Redirection issue when enabling/disabling HTTPS
- Fix: Satellite signal bar is centred under IE
- Fix: During upgrade disable default route if DHCP client is configured
- Fix: DHCP fallback IP isn’t set
- Fix: Memory leak in Main page with IE8/IE9 (session timeout implemented)
- Fix: Low power mode fix for newer revisions of NanoStation M5
- Fix: Device discovery issue when DMZ port is enabled
- Fix: Cannot switch from Advanced to Simple Configuration mode when network role is Router
- Fix: Auto Channel does not follow channel plan for Canada (Rocket Titanium)
- Fix: OSPF and other unregistered multicast traffic transmit problems in PtMP
- Fix: Skip EAP security certificate date validation if device date is before certificate start date
- Fix: Do not send discovery/ARP requests through bridge ports
- Fix: Enable busybox option to prefer IPv4
- Fix: UPnP: Router should accept “PORT FORWARD” requests from LAN side only
- Fix: Sometimes station can’t associate when switching from open to WPA security
- Fix: Enable DFS when choosing country Austria
- Fix: Disable “Block Management” option for WAN in default configuration (AirRouter, AirRouter HP, PowerAP N)

Regulatory updates:
- Enable DFS for Germany upper band (5.8GHz) channels
- Update New Zealand allowed frequencies for 5GHz
- Update Chilean allowed frequencies for 5GHz

They dropped the presentation PDF quickly this year, so lets have a look, shall we

So they kept going on about this CCR thing…whatever that is about. They said a few new things about it like:

I’m not sure that is a bonus…or I suppose it is.

Then they talk about some SXT stuff, which is great, I love the SXTs.

These have been announced, but I haven’t talked about them sooooo:

RB951G-2HnD

This has the same form factor as the 751 routers, but has a more powerful CPU and more RAM. I’m assuming these will replace the 751s?

RB260GS

Blah

I like everything about this save for SwitchOS…just not a fan.

SFPs

S-85DLC05D
S-31DLC20D

This is a crazy good price for new optics!

RB911G

RB912G

RB912 Outdoor Enclosure

This looks AWESOME. I would say this is direct competition with the Ubiquiti Rockets. I’m willing to bet I can make a bracket that will let you mount this right on a Ubiquiti antenna

SEXTANT G

Features the new 911 inside.

R11E-2HND

R11E-HPND

RB14EU

This has 4 slots for the new miniPCI-E cards as well as slots for 3G cards…a lot of power in a single card.

SXT HG

This looks like a cool new radio for distance P2P as well as client connections.

SXT SA

Sector SXT.

Groove52

2 or 5GHz.

Cloud Core Switch – CRS

Soooo they finally put out a real switch, or is it a router? Since it runs routerOS I’m going to say it’s a router(not really, it is a switch people). Thanks to Andrew for bursting my bubble by telling me that it has a 600MHz AR9344 CPU. I think this was a brilliant move on their part, but what I’m really waiting for is the price.

I can imagine purchasing one of these to terminate A sizable chunk of P2Ps I have. Now we ask the question…will they make a version that has 12 SFPs and 12 copper or 24 SFP with 2 coppers?

Right now I’m content with just the 24 copper I also want to see a shot of the rackmount version.

CCR with SFP+

I think no one is surprised by this one, and everyone has been patiently waiting on it. As version 6 becomes more mature I think distributors will have a heck of a time keeping these on the shelf. This will make a terrific border/core router.

I’m still entirely open to Mikrotik sending me free samples…especially of the new CRS switch

I did a quick google and this beautiful bastard had the solution, static ARP with proxy-arp.

Figure out what the existing MAC is on the interface by issuing;

1

show interface

Then use that mac address along with proxy ARP for your secondary IP:

1

arp DMZ 192.168.3.3 0000.1111.2222 alias

Wwwweeeeeeeeeeee